Order Products : sales@su-jiao.com
KRATON® D1161 P
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ooWhfP_KRATON-D1161-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1161 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied from North America in the physical form identified below.
Kraton D1161 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 8.5 to 19 | g/10 min | ASTM D1238 |
| Antioxidant Additive 1 | 0.080 to 0.30 | % | Internal Method |
| Ash Content | |||
| PTM | 3.0 to 5.0 | % | ISO 247 |
| T, Talc | 0.20 to 0.40 | % | Internal Method |
| Polystyrene Content | 14 to 17 | % | Internal Method |
| Solution Viscosity - Toluene, 25%w (25°C) | 0.80 to 1.6 | Pa·s | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.30 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 19.0 | ||
| Styrene/Rubber ratio | 15/85 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 32 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 0.896 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 21.4 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 1300 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Primary antioxidant is a non-staining, phenolic antioxidant. The antioxidant package also contains a non-TNPP secondary antioxidant at a target level of 0.2% wt. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BC PS MG-150 | BC Chemical Co., Ltd. | PS (GPPS) | BC PS |
| Badamid® PA612 GF30 | Bada AG | Nylon 612 | Badamid® |
| CALIBRE™ 302-10 | Trinseo | PC | CALIBRE™ |
| COSMOPLENE® FY4012E | TPC, The Polyolefin Company (Singapore) Pte Ltd | PP Homopolymer | COSMOPLENE® |
| PERLER® N0925000A10 | A.D. Compound S.p.A. | PP Copolymer | PERLER® |
