Order Products : sales@su-jiao.com
ISOTHANE® GB1095A-H
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Great Eastern Resins Industrial Co Ltd (GRECO) |
| Trademark: | ISOTHANE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | om4Vdx_ISOTHANE-GB1095A-H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ISOTHANE GB1095A-H is a 94 Shore A, high performance Poly(adipate)ester and environmental TPU based on renewable materials with bio-based content 31%. This renewable resin also features the properties. Characteristics: ISOTHANE GB1095A-H product is polyester poly(adipate)ester based thermoplastic polyurethanes. It exhibits excellent toughness, abrasive resistance, and solvent resistance. The product can be injection molded. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 94 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (H-22 Wheel) | 57.0 | mg | ASTM D1044 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain | 13.0 | MPa | ASTM D412 |
| 100% strain | 15.0 | MPa | ASTM D412 |
| 300% strain | 28.0 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 38.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 460 | % | ASTM D412 |
| Tear Strength 1 | 198 | kN/m | ASTM D624 |
| Compression Set (23°C, 22 hr) | 33 | % | ASTM D395B |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Biobased Content | 31.0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 200 | °C | |
| Middle Temperature | 205 | °C | |
| Front Temperature | 205 | °C | |
| Nozzle Temperature | 200 | °C |
| Injection instructions |
|---|
| Cooling Time: 30-40 sec |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Task® 7 - Flame Out® | Smooth-On, Inc | PUR, Unspecified | Task® |
| UNITIKA Nylon 6 EX-8406G30 | UNITIKA Plastics Division | Nylon 6 | UNITIKA Nylon 6 |
| NORDEL™ IP 4640 | The Dow Chemical Company | EPDM | NORDEL™ |
| EASYPOXY® K-230 | Cytec Industries Inc. | Epoxy | EASYPOXY® |
| COPEC® CC6FDN (Series: VS/CR/AD1) | KRAIBURG TPE | TPE | COPEC® |
