Order Products : sales@su-jiao.com

Pro-fax 6231N

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	INDELPRO, S.A. de C.V.
Trademark:	Pro-fax
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	okeKrg_Profax6231N.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Profax 6231N is a high melt flow homopolymer with a narrow molecular weight distribution designed for spundbond and continuous filament applications that require superior spinnability and finer fibers. This product can be used for thin-wall injection molding. Profax 6231N is available in pellet form. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: Controlled molecular weight distribution High melt flow for short injection cycles Good processing stability Excellent dimensional stability Excellent stability for high speed fiber spinning Typical Applications: Thin-wall injection Caps Fiber extrusión Continuous filament

Message

Profax 6231N is a high melt flow homopolymer with a narrow molecular weight distribution designed for spundbond and continuous filament applications that require superior spinnability and finer fibers. This product can be used for thin-wall injection molding. Profax 6231N is available in pellet form.

The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520.

Features:

Controlled molecular weight distribution

High melt flow for short injection cycles

Good processing stability

Excellent dimensional stability

Excellent stability for high speed fiber spinning

Typical Applications:

Thin-wall injection

Caps

Fiber extrusión

Continuous filament

General Information
Features	High Dimensional Stability Homopolymer Good processing stability High liquidity Narrow molecular weight distribution
Uses	Thin wall parts Spunbond Shield Filament Fiber
Agency Ratings	FDA 21 CFR 177.1520
Forms	Particle
Processing Method	Fiber (spinning) extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.900	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	25	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	36.0	MPa	ASTM D638
Tensile Elongation (Yield)	8.0	%	ASTM D638
Flexural Modulus	1300	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	30	J/m	ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	109	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
Maxxam™ XN-418.G001-1000	PolyOne Corporation	PP Copolymer	Maxxam™
RTP 800 SI	RTP Company	Acetal (POM) Copolymer	RTP
Akulon® F132	DSM Engineering Plastics	Nylon 6	Akulon®
EGYPTENE LL 0220 KJ	Sidpec (Sidi Kerir Petrochemicals Co.)	LLDPE	EGYPTENE
Geon™ Vinyl Flexible H41276D	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Flexible