Order Products : sales@su-jiao.com
MAJORIS GC300 - 1367
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oes1qC_MAJORIS-GC300---1367.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GC300 - 1367 is a 30% mineral CaCO 3 filled polypropylene compound intended for injection moulding. The product is available in both black (GC300 - 8229) and natural (GC300) but other colours can be provided on request. GC300 - 1367 has been developed especially for appliances. APPLICATIONS Products requiring very high rigidity, very high distortion temperature, low shrinkage, high dimensional stability and can suitably be made from GC300 - 1367. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.14 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 25 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.90 - 1.4 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 20.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 5.0 | % | ISO 527-2 |
| Flexural Modulus - 1% Secant | 2200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 35 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 121 | °C | ISO 75-2/B |
| Ball Pressure Test (130°C) | Pass | NF C 61-303 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 | |
| Glow Wire Flammability Index (2.00 mm) | 750 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 220 - 270 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Glas® 2206-22 CR-SX | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| AMPLIFY™ TY 1351 | The Dow Chemical Company | MAH-g | AMPLIFY™ TY |
| Arak HDPE EX2 | Shazand (Arak) Petrochemical Corporation | HDPE | Arak HDPE |
| KRATON® D2104 DI-N | Kraton Polymers LLC | SBS | KRATON® |
| Styropek® BF 395 | Styropek S.A. de C.V. | PS (EPS) | Styropek® |
