Order Products : sales@su-jiao.com
HANWHA LDPE 5317
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Hanwha Chemical |
| Trademark: | HANWHA LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oddsaz_HANWHA-LDPE-5317.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HANWHA LDPE 5317 is manufactured by ICI autoclave high pressure process and designed for general purpose film. LDPE 5317 has well balanced property of mechanical and optical property. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.3 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 12.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 700 | % | ASTM D638 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 50 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 50 µm | 22.1 | MPa | ASTM D882 |
| TD : Break, 50 µm | 19.6 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 50 µm | 330 | % | ASTM D882 |
| TD : Break, 50 µm | 550 | % | ASTM D882 |
| Dart Drop Impact (50 µm) | 90 | g | ASTM D1709 |
| Tensile Tear Strength | ASTM D1004 | ||
| MD : 50.0 µm | 93.2 | kN/m | ASTM D1004 |
| TD : 50.0 µm | 92.0 | ASTM D1004 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 89.0 | °C | ASTM D1525 |
| Melting Temperature | 111 | °C | Internal method |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze (50.0 µm) | 8.0 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 140 - 180 | °C |
| Extrusion instructions |
|---|
| Blow-up Ratio: 2 to 3Optimum Gage Range: 0.03 to 0.1 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® N8950 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| PONACOM PE 4406 | Ponachem Compound GmbH | HDPE | PONACOM PE |
| Smooth-On EA-40® | Smooth-On, Inc | Epoxy | Smooth-On |
| Stirol UPS-0801 (extra) | JSC CONCERN STIROL | PS (HIPS) | Stirol |
| DynaMix™ PD1804-BLK | Polymer Dynamix | Acetal (POM) Copolymer | DynaMix™ |
