Order Products : sales@su-jiao.com

PRIMALENE WPP551

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Southern Polymer, Inc.
Trademark:	PRIMALENE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	od82RG_PRIMALENE-WPP551.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

A 16 melt index low density polyethylene

Applications:

Large housewares

Tamper evident, snap-on caps

Feminine hygiene applications

Features:

Excellent flexibility

Excellent flow

Moderate mold release

Good warpage resistance

FDA 21 CFR 177.1520

General Information
Features	Food Contact Acceptable Good Flexibility Good Flow Good Mold Release Low Density Warp Resistant
Uses	Caps Consumer Applications Food Service Applications Household Goods Hygiene Non-specific Food Applications
Agency Ratings	FDA 21 CFR 177.1520

Physical	Nominal Value	Unit	Test Method
Density	0.917	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	16	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	46		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	8.96	MPa	ASTM D638
Tensile Elongation (Break)	500	%	ASTM D638
Flexural Modulus - Tangent ²	207	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	-53.9	°C	ASTM D746
Vicat Softening Temperature	85.0	°C	ASTM D1525

Note Message
1 .	51 mm/min
2 .	13 mm/min

Resin Grade	Manufacturer	Category	Trademark
VENYL SN000 - 3121	AD majoris	Nylon 6	VENYL
Abstron IM21G	Bhansali Engineering Polymers Limited	ABS	Abstron
ELITE™ AT 6202	The Dow Chemical Company	EPE	ELITE™
PENTAMID A GV25 H UV natural	PENTAC Polymer GmbH	Nylon 66	PENTAMID A
Medalist® MD-53263 (PRELIMINARY DATA)	Teknor Apex Company	TPE	Medalist™