Order Products : sales@su-jiao.com
KYDEX® 5555 MB
| Category: | PMMA+PVC , Acrylic (PMMA) + PVC |
| Manufacturer: | SEKISUI Polymer Innovations, LLC |
| Trademark: | KYDEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ocY4Ye_KYDEX-5555-MB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Microban® technology KYDEX® is specifically formulated to meet the safety needs of the aviation industry. KYDEX® 5555 is a proprietary, high performance acrylic/PVC thermoplastic sheet that meets all fire retardancy requirements set forth in Federal Aviation Regulations 25.853 paragraphs (a) and (d) (old (c)) including low heat release (65/65) in the OSU rate of heat release test. KYDEX® 5555 exceeds the heat release to a level of 55/55. Its excellent properties make it the ideal material to form two-and-three-dimensional aircraft components. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.52 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 3.18 mm) | 111 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (3.18 mm) | 43.0 | MPa | ASTM D638 |
| Flexural Modulus (3.18 mm) | 3830 | MPa | ASTM D790 |
| Flexural Strength (3.18 mm) | 81.2 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed, 3.18 mm) | 75.9 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flammability | |||
| Radiant Panel : > 711.0 µm | Pass | ASTM E162 | |
| Rate of Heat Release | <55/55 | FAR 25.853(d) | |
| Smoke Generation | < 150 | FAR 25.853(d) |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Thermoforming Molding Temperature | 170 to 200 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROMID A 280 G6 MB1 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| ADENE LXJAG | A.D. Compound spa | PP Copolymer | ADENE |
| Axiall PVC 8838 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Gallonprene® GP540-8002(n)F | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| TABOREN® PH 42 T 20-990 | SILON s.r.o. | PP Homopolymer | TABOREN® |
