Order Products : sales@su-jiao.com
CERTENE™ HGB-0457B
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | obbomm_CERTENE-HGB-0457B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HGB-0457B is a certified prime BLOW MOLDING and COMPRESSION copolymer developed for the production of high performance containers for general purpose and cap closure applications. HGB-0457B features BROAD-BIMODAL Molecular Weight Distribution that offers a unique combination of ESCR, Stiffness and Impact resistance at significant bottle weight reduction, and excellent processability in both continuous and intermittent equipments. HGB-0457B applications include small to medium-size containers for detergents, bleach chemicals, engine oil, antifreeze, toiletries, cosmetics and battle cap for carbonated soft drink. HGB-0457B recommended processing temperature is 150 to 170°C. with mold at 10 to 30°C. HGB-0457B conforms with FDA regulation 21CFR 177.1520 (c ) 3.1(a) + 3.2(a) and most international regulations concerning polyethylene use in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.957 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.40 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 1.75 mm, 100% Igepal, Compression Molded, F50) | > 900 | hr | ASTM D1693B |
| Volume density | 0.560 | g/l |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Blow Molding Mold Temperature | 10 - 30 | °C | |
| Blow Molding Temperature | 150 - 170 | °C |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Compression Molded) | 28.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | 1100 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Compression Molded) | 1520 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength (Compression Molded) | 250 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 76.0 | °C | ASTM D648 |
| Brittleness Temperature | < -80.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Test specimens from compression molded plaque according to ASTM D 1928 Procedure C. |
| Note Message | |
|---|---|
| 1 . | Notched Bent Strip |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AKROMID® B3 GF 50 black (2939) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| Diaterm® B26 GF25 | DTR S.r.l. (Develop Thermoplastic Resins) | Nylon 66 | Diaterm® |
| FRIANYL® A3 RV0 | Nilit Plastics | Nylon 66 | FRIANYL® |
| Edgetek™ AS-000/000 AS BLACK | PolyOne Corporation | ABS | Edgetek™ |
| KOCETAL® GF305LO | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
