Order Products : sales@su-jiao.com

Osterlene® LDC1821

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Osterman & Company
Trademark:	Osterlene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	obTgWX_OsterleneLDC1821.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

LDC1821 is a series of homopolymer resins that combine premium clarity with strength and stiffness. It exhibits good impact strength on both flat and creased film. It is recommended for textile packaging, light produce, bread bags and other thin packaging films enhanced by clarity and sparkle.

Osterlene LDC1821 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Specific recommendations for processing can only be made when the processing conditions, equipment and end use are known. Consult your Osterman sales Representative.

General Information
Features	Rigid, good Homopolymer Workability, good Good strength Definition, high
Uses	Packaging Films Bags
Agency Ratings	FDA 21 CFR 177.1520

Physical	Nominal Value	Unit	Test Method
Density	0.921	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.8	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
secant modulus			ASTM D882
1% secant, MD	179	MPa	ASTM D882
1% secant, TD	207	MPa	ASTM D882
Tensile Strength			ASTM D882
MD : Yield	10.3	MPa	ASTM D882
TD : Yield	11.0	MPa	ASTM D882
MD : Fracture	27.6	MPa	ASTM D882
TD : Fracture	23.4	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Fracture	300	%	ASTM D882
TD : Fracture	500	%	ASTM D882
Dart Drop Impact ¹	90	g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD	360	g	ASTM D1922
TD	200	g	ASTM D1922

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	100	°C	ASTM D1525

Optical	Nominal Value	Unit	Test Method
Gloss (45°)	70		ASTM D2457
Haze	5.0	%	ASTM D1003

Note Message
1 .	F50

Resin Grade	Manufacturer	Category	Trademark
Network Polymers LDPE 10 0127 EVA	Network Polymers, Inc.	EVA	Network Polymers LDPE
ALCUDIA® HDPE 5803	REPSOL	HDPE	ALCUDIA® HDPE
Hylon® N1015HLFRA	Ravago Manufacturing Americas, LLC	Nylon 66	Hylon®
Jam PE 424F5	Jam Petrochemical Company	HDPE	Jam PE
Karina BLACK PVC COMPOUND -E 805D48/ 1-F-IS	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina