Order Products : sales@su-jiao.com
Generic EPDM
| Category: | EPDM , Ethylene Propylene Diene Terpolymer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | obGxSi_Generic-EPDM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic EPDM This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 0.858 - 0.873 | g/cm³ | ASTM D792 |
| 23°C | 1.56 - 1.58 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 0.50 - 3.1 | g/10 min | ASTM D1238 |
| Mooney Viscosity | 18 - 83 | MU | ASTM D1646 |
| Ethylene Content | 49.5 - 71.0 | wt% | |
| Ethylidene Norbornene (ENB) Content | 3.8 - 8.3 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | |||
| 23°C | 82 - 93 | ASTM D2240 | |
| 23°C | 60 - 69 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 5.00 - 14.1 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 280 - 800 | % | ISO 527-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 1.0E+14 - 1.0E+16 | ohms·cm | IEC 60093 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 60.0 - 160 | °C | |
| Cylinder Zone 2 Temp. | 65.0 - 175 | °C | |
| Cylinder Zone 3 Temp. | 65.0 - 190 | °C | |
| Cylinder Zone 4 Temp. | 189 - 205 | °C | |
| Die Temperature | 214 - 215 | °C |
| Extrusion instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic EPDMThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrant EPP TIVAR® 1000 UV Stabilized Natural | Quadrant Engineering Plastic Products | UHMWPE | Quadrant EPP |
| Qenos PP PPR 2042 | Qenos Pty Ltd | PP Copolymer | Qenos PP |
| Methylon 75108 | Durez Corporation | Phenolic | Methylon |
| BESTNYL SE35VI01AH | Triesa Plastics | Nylon 66 | BESTNYL |
| Borealis PP BC650MO | Borealis AG | PP Impact Copolymer | Borealis PP |
