Order Products : sales@su-jiao.com

Qenos PE GF7660

Category:	HDPE, MMW , High Density (MMW) Polyethylene
Manufacturer:	Qenos Pty Ltd
Trademark:	Qenos PE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	oaBgxQ_Qenos-PE-GF7660.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
GF7660 is a medium molecular weight extrusion blow moulding grade of High Density Polyethylene. This grade exhibits good ESCR and good toughness. GF7660 is designed primarily for extrusion blow moulding of small to medium sized containers. Typical applications include detergent and pharmaceutical bottles. Suitability for use in any application should be determined by appropriate performance testing. GF7660 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.

Message

GF7660 is a medium molecular weight extrusion blow moulding grade of High Density Polyethylene. This grade exhibits good ESCR and good toughness.

GF7660 is designed primarily for extrusion blow moulding of small to medium sized containers. Typical applications include detergent and pharmaceutical bottles. Suitability for use in any application should be determined by appropriate performance testing.

GF7660 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.

General Information
Features	Food Contact Acceptable Good Toughness High ESCR (Stress Crack Resist.) Medium Molecular Weight
Uses	Bottles Containers
Agency Ratings	FDA 21 CFR 177.1520(c) 3.1
Forms	Pellets
Processing Method	Extrusion Blow Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.953	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg	0.40	g/10 min
190°C/5.0 kg	1.6	g/10 min
Environmental Stress-Cracking Resistance	200	hr	ASTM D1693B

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	30.0	MPa	ASTM D638
Flexural Modulus	1200	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (-30°C)	950	J/m	ASTM D256A

Resin Grade	Manufacturer	Category	Trademark
Maxelast® F02-138A	Nantong Polymax Elastomer Technology, Co., Ltd	TPE	Maxelast®
UBE Nylon 7115U	UBE America, Inc.	Nylon 612	UBE Nylon
NuSil R-2560	NuSil Technology	Silicone	NuSil
FORMION® FI 200HFU	A. Schulman Inc.	Ionomer	FORMION®
KOCETAL® UR304LO	Kolon Plastics, Inc.	Acetal (POM) Copolymer	KOCETAL®