Order Products : sales@su-jiao.com
TRIBOCOMP® PA6 TS0
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | EPIC Polymers |
| Trademark: | TRIBOCOMP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oYGXvU_TRIBOCOMP-PA6-TS0.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TRIBOCOMP®PA6 TS0 is a polyamide 6 (nylon 6) product containing 20% ptfe fiber. It is available in Europe. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.25 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow | 1.2 | -- | % | ISO 294-4 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 2.4 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 2800 | 1100 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 60.0 | 35.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | > 10 | -- | % | ISO 527-2 |
| Flexural Modulus (23°C) | 2400 | -- | MPa | ISO 178 |
| Coefficient of Friction | ASTM D3702 | |||
| Dynamic | 0.20 | -- | ASTM D3702 | |
| Static | 0.11 | -- | ASTM D3702 | |
| Wear Factor | 16.0 | -- | ASTM D3702 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 5.0 | -- | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 45 | -- | kJ/m² | ISO 179 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 180 | -- | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 65.0 | -- | °C | ISO 75-2/A |
| CLTE - Flow (23°C) | 8.0E-5 | -- | cm/cm/°C | ISO 7991 |
| Thermal Conductivity | 0.24 | -- | W/m/K | ISO 22007 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+12 | -- | ohms | ASTM D257 |
| Dielectric Strength (2.00 mm) | 29 | -- | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 600 | -- | V | IEC 60112 |
| Additional Information |
|---|
| 干燥 The value listed as Molding Shrinkage ISO 294-4, was tested in accordance with S.O.P. methods. |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 220 - 260 | °C | |
| Middle Temperature | 225 - 270 | °C | |
| Front Temperature | 230 - 280 | °C | |
| Nozzle Temperature | 230 - 290 | °C | |
| Processing (Melt) Temp | < 320 | °C | |
| Mold Temperature | 80.0 - 120 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Capa™ 6800 | Perstorp Holding AB | PCL | Capa™ |
| Jampilen H1850 | Jam Polypropylene Company | PP Homopolymer | Jampilen |
| Lumiplas® LD7000FH | LG Chem Ltd. | PC | Lumiplas® |
| ESTOPLAST EP 40002NN01 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
| Ultramid® Structure B3WG8 LFX BK00564 | BASF Corporation | Nylon 6 | Ultramid® |
