Order Products : sales@su-jiao.com
Fainplast HERS 05/2
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | Fainplast Compounds S.r.l |
| Trademark: | Fainplast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oWyrgQ_Fainplast-HERS-05-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Crosslinkable and expandable compound based on EVA. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.450 - 0.510 | g/cm³ | ISO 1183 |
| Molding Shrinkage (70°C, 24 hours) | < 3.8 | % | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | |||
| Shaw C | 67 - 73 | ASTM D2240 | |
| Shaw A, 381mm | 48 - 52 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | > 3.00 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 380 | % | ISO 527-2 |
| Abrasion Resistance | mm³ | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Linear Thermal Expansion | 1.2 | % | Internal method |
| Injection instructions |
|---|
| Processing: This compound should be injected into moulds thermoregulated at 180-190 °C, where the crosslinking occurs in about 6/7 minutes. Upon opening the mould, the piece expands and its volume, depending on the type of material, increases with respect to the volume of the figure of the mould. Volume expansion is uniform in the three dimensions and increases linearly with a ratio of 1.2. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNAMID® B B-101P1 | Poly Plastic | Nylon 6 | TECHNAMID® B |
| Terblend® N NM-19XP | INEOS Styrolution Group GmbH | ABS+Nylon | Terblend® N |
| Zytel® 80G33HS1L NC010 | DuPont Performance Polymers | Nylon 66 | Zytel® |
| ALCOM® TCD PA66 5040 14015 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® TCD PA66 |
| HiFill® PPSU TL10 | Techmer Engineered Solutions | PPSU | HiFill® |
