Order Products : sales@su-jiao.com
NEXUS ABS ABSGF30
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Nexus Resin Group, LLC. |
| Trademark: | NEXUS ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oVIdiR_NEXUS-ABS-ABSGF30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Molding Grade ABS |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 5.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.10 to 0.20 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 5860 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 65.5 | MPa | ASTM D638 |
| Flexural Modulus | 6830 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 98.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 102 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 to 93.3 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Suggested Max Moisture | 0.15 | % | |
| Rear Temperature | 188 to 218 | °C | |
| Middle Temperature | 204 to 232 | °C | |
| Front Temperature | 218 to 246 | °C | |
| Nozzle Temperature | 218 to 274 | °C | |
| Processing (Melt) Temp | 218 to 274 | °C | |
| Mold Temperature | 48.9 to 76.7 | °C | |
| Back Pressure | 0.172 to 0.689 | MPa | |
| Screw Speed | 25 to 75 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rynite® 530 NC010 | DuPont Performance Polymers | PET | Rynite® |
| Next Nylon 6 Prime Series NST35-01NC | Next Polymers Ltd. | Nylon 6 | Next Nylon 6 Prime Series |
| ACRYLITE® H12 | Evonik Cyro LLC | Acrylic (PMMA) | ACRYLITE® |
| KumhoSunny PBT 3710G | Shanghai KumhoSunny Plastics Co., Ltd. | PBT | KumhoSunny PBT |
| NORYL GTX™ GTX975 resin | SABIC Innovative Plastics Europe | PPE+PS+Nylon | NORYL GTX™ |
