Order Products : sales@su-jiao.com
Cawiton® SN930
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Wittenburg B.V. |
| Trademark: | Cawiton® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oUSz62_Cawiton-SN930.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Cawiton SN930 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Europe for injection molding. Primary attribute of Cawiton SN930: Copolymer. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.17 | g/cm³ | ISO 2781 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 30 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| Across Flow : 100% Strain | 0.800 | MPa | |
| Flow : 100% Strain | 1.00 | MPa | |
| Across Flow : 200% Strain | 1.00 | MPa | |
| Flow : 200% Strain | 1.20 | MPa | |
| Across Flow : 300% Strain | 1.40 | MPa | |
| Flow : 300% Strain | 1.50 | MPa | |
| Tensile Stress | ISO 37 | ||
| Across Flow : Yield | 4.50 | MPa | |
| Flow : Yield | 2.60 | MPa | |
| Tensile Elongation | ISO 37 | ||
| Across Flow : Break | 840 | % | |
| Flow : Break | 680 | % | |
| Tear Strength | ISO 34-1 | ||
| Across Flow | 18 | kN/m | |
| Flow | 15 | kN/m | |
| Compression Set (70°C, 22 hr) | 37 | % | ISO 815 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) 1 | 166 | °C | DSC |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | 30.0 to 60.0 | °C | |
| Rear Temperature | 180 to 220 | °C | |
| Middle Temperature | 190 to 230 | °C | |
| Front Temperature | 190 to 230 | °C | |
| Nozzle Temperature | 200 to 240 | °C | |
| Processing (Melt) Temp | 180 to 240 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Measured with a differential scanning calorimeter |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starflam B28UL | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| Synres-Almoco AMC 2568 | Synres-Almoco BV | Polyester, TS | Synres-Almoco |
| Moplen HP526J | LyondellBasell Industries | PP Homopolymer | Moplen |
| Hysun® 697 | Ravago Manufacturing Americas, LLC | ASA | Hysun® |
| Ipethene® 670 | Carmel Olefins Ltd. | LDPE | Ipethene® |
