| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ TFM™ Modified PTFE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oQo2Ky_3M-Dyneon-TFM-Modified-PTFE-TFM-2033Z.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
2nd-generation PTFE for high-performance pipes Features
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 2.16 | g/cm³ | ISO 12086 |
| Apparent Density | 0.45 | g/cm³ | ISO 60 |
| Average Particle Size | 550 | µm | ISO 13320 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Extrusion Pressure - Reduction Ratio 400 | 31.0 | MPa | ASTM D4895 |
| Reduction Ratio | 20-100:1 | Internal Method |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 37.0 | MPa | ISO 527-3 |
| Tensile Elongation 2(Break) | 430 | % | ISO 527-3 |
| Note Message | |
|---|---|
| 1 . | Measured on sintered moldings |
| 2 . | Measured on sintered moldings |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ MX5200-5004 RS BLACK | PolyOne Corporation | PP Homopolymer | Maxxam™ |
| Grilon® TSM-30/2 | EMS-GRIVORY | Nylon 66/6 | Grilon® |
| Jackdaw ABS GX10BL6576 | Jackdaw Polymers | ABS | Jackdaw ABS |
| Optix® CA-1000 I FDA | Plaskolite, Inc. | Acrylic (PMMA) | Optix® |
| Clyrell RC6049 | LyondellBasell Industries | PP, Unspecified | Clyrell |