Order Products : sales@su-jiao.com
Pearlthane® ECO D12T90E
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Pearlthane® ECO |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oOGfOi_Pearlthane-ECO-D12T90E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Pearlthane® ECO D12T90E is a high performance bio-based thermoplastic polyurethane. With ca. 38% bio-based content. Main Application : Extrusion Special features : Very good flexibility at low temperatures and very good abrasion resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.15 | g/cm³ | ISO 2781 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 1 sec) | 91 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (500 mm) | 39.0 | MPa | ISO 527-2/5A |
| Tensile Strain (Break, 500 mm) | 470 | % | ISO 527-2/5A |
| Abrasion Resistance | 35.0 | mm³ | ISO 4649-A |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Biobased Content | 38 | % | ASTM D6866 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ISO 527-2 | ||
| 100% Strain, 500 mm | 9.00 | MPa | |
| 300% Strain, 500 mm | 25.0 | MPa | |
| Tear Strength 2 | 120 | kN/m | ISO 34-1 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Cylinder Zone 1 Temp. | 190 to 200 | °C | |
| Cylinder Zone 2 Temp. | 195 to 205 | °C | |
| Cylinder Zone 3 Temp. | 200 to 210 | °C | |
| Cylinder Zone 4 Temp. | 200 to 210 | °C | |
| Adapter Temperature | 205 to 215 | °C | |
| Die Temperature | 205 | °C |
| Note Message | |
|---|---|
| 1 . | Type 5 |
| 2 . | Method Ba, Angle (Unnicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shinko-Lac® ABS GL-4 | Mitsubishi Rayon America Inc. | ABS | Shinko-Lac® |
| TAROMID A 280 G5 Y0 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| KOPA® KN333HI4BL | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
| LUVOCOM® 6-8669 | LEHVOSS Group | Nylon 12 | LUVOCOM® |
| Electrafil® 1105-10819 | Techmer Engineered Solutions | PEEK | Electrafil® |
