Order Products : sales@su-jiao.com
MBA HDPE 1107 E
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | MBA Polymers |
| Trademark: | MBA HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oMdQvz_MBA-HDPE-1107-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A post-consumer recycled fractional melt high density polyethylene for general use. Available in standard black (reference 90/04). |
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | Internal Method |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 20.0 | MPa | ISO 527-2/50 |
| Flexural Modulus (23°C) | 600 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 20 | kJ/m² | ISO 180/1A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 | °C | |
| Drying Time | 1.0 to 2.0 | hr | |
| Suggested Max Moisture | 0.050 to 0.10 | % | |
| Processing (Melt) Temp | 190 to 210 | °C | |
| Mold Temperature | 10.0 to 30.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 | °C | |
| Drying Time | 1.0 to 2.0 | hr | |
| Suggested Max Moisture | 0.050 to 0.10 | % | |
| Melt Temperature | 190 to 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravamid® R200 GF 18 | Ravago Group | Nylon 6 | Ravamid® |
| Norpex® PPE AX265 FR | Custom Resins Group | PPE | Norpex® |
| CALSIN 1300W | Pooya Polymer Tehran | Polyolefin, Unspecified | CALSIN |
| POLYfill PPHC T8020 | Polykemi AB | PP, Unspecified | POLYfill |
| Panlite® ML-5202ZHP | TEIJIN LIMITED | PC | Panlite® |
