Order Products : sales@su-jiao.com
TULAMID® PA-TM20
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | UCC Shchekinoazot |
| Trademark: | TULAMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oKgiHm_TULAMID-PA-TM20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polyamide 6 mineral-filled is an engineering plastic based on thermoplastic polymer - polyamide 6 - and mineral stuff - talc and mica- that changes its properties. Application Polyamide 6 mineral-filled is applied for production of machine components, high-tech, industrial and consumer products. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.25 to 1.31 | g/cm³ | Internal Method |
| Molding Shrinkage - Flow | 0.60 to 0.80 | % | Internal Method |
| Particle Size Distribution - 2-5 mm | > 97 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hardness | > 137 | MPa | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | Internal Method | ||
| Across Flow : Break | > 100 | MPa | |
| -- | > 60.0 | MPa | |
| Tensile Elongation (Break) | > 6.0 | % | Internal Method |
| Flexural Modulus | > 2800 | MPa | Internal Method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | > 70 | kJ/m² | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 210 to 230 | °C | Internal Method |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+13 | ohms | Internal Method |
| Volume Resistivity | > 1.0E+13 | ohms·cm | Internal Method |
| Dielectric Strength | > 20 | kV/mm | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 501 FR | RTP Company | SAN | RTP |
| SLOVAMID® 66 W 40 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| TEREZ PA 6 7500 GF 60 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| HIVAL® 106033 | Nexeo Solutions, LLC. | LLDPE | HIVAL® |
| Plexiglas® V825 | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Plexiglas® |
