Order Products : sales@su-jiao.com
RTP 281D TFE 15
| Category: | Nylon 612 , Polyamide 612 |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oK6Pgl_RTP-281D-TFE-15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.55 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18 mm, Injection Molded | 0.60 | % | |
| 6.35 mm, Injection Molded | 0.90 | % | |
| Water Absorption (23°C, 24 hr) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 6550 | MPa | ASTM D638 |
| Tensile Strength | 114 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 2.5 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 5510 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 189 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 48 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 270 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, Injection Molded | 210 | °C | |
| 1.8 MPa, Unannealed, Injection Molded | 204 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+4 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 252 to 279 | °C | |
| Middle Temperature | 252 to 279 | °C | |
| Front Temperature | 252 to 279 | °C | |
| Mold Temperature | 60.0 to 93.0 | °C | |
| Injection Pressure | 69.0 to 124 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BioCeres® BC-XBD01 | FuturaMat | Biodeg Polymers | BioCeres® |
| Celanex® 3216 | Celanese Corporation | PBT | Celanex® |
| Ferro PP NPP00GC01BK | Ferro Corporation | PP, Unspecified | Ferro PP |
| ELASTOSIL® LR 3004/30 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| ESPRENE EPDM 552 | Sumitomo Chemical Co., Ltd. | EPDM | ESPRENE EPDM |
