Order Products : sales@su-jiao.com
SCHULAMID® RD 6 GF 30
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | A. Schulman Europe |
| Trademark: | SCHULAMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oIknKa_SCHULAMIDRD6GF30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 30% glass fiber reinforced compound based on Polyamide 6 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.25 | -- | g/cm³ | ISO 1183/A |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 8700 | 6700 | MPa | ISO 527-2/1A/1 |
| Tensile Stress (Break) | 130 | 95.0 | MPa | ISO 527-2/1A/5 |
| Tensile Strain (Break) | 3.0 | 4.5 | % | ISO 527-2/1A/5 |
| Flexural Modulus | 7000 | -- | MPa | ISO 178 |
| Flexural Stress (3.3% strain) | 180 | -- | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 10 | -- | kJ/m² | ISO 179/1eA |
| 23°C | 15 | 17 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 46 | -- | kJ/m² | ISO 179/1eU |
| 23°C | 56 | 60 | kJ/m² | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 215 | -- | °C | ISO 75-2/Bf |
| 1.8 MPa, not annealed | 190 | -- | °C | ISO 75-2/Af |
| Vicat Softening Temperature | ||||
| -- | 220 | -- | °C | ISO 306/A50 |
| -- | 175 | -- | °C | ISO 306/B50 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Burning Rate | 12 | -- | mm/min | ISO 3795 |
| Flammability Classification | IEC 60695-11-10, -20 | |||
| 1.5 mm | HB | -- | IEC 60695-11-10, -20 | |
| 3.0 mm | HB | -- | IEC 60695-11-10, -20 |
| Additional Information |
|---|
| 干燥 1.) Not for use in food contact applications2.) Not for use in medical or pharmaceutical applicationsCharacteristic propertiesAs a semi-crystalline thermoplastic SCHULAMID® 6 possesses high rigidity,hardness and good cold impact resistance. |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.040 - 0.10 | % | |
| Suggested Max Regrind | 20 | % | |
| Processing (Melt) Temp | 250 - 280 | °C | |
| Mold Temperature | 60 - 100 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® HDB 503 Phillips Process | Marco Polo International, Inc. | HDPE | MARPOL® |
| Unichem 6022A NATURAL | Colorite Polymers | PVC, Flexible | Unichem |
| Comco PA 4.6 | Comco-Plastic GmbH | Nylon 46 | Comco |
| Electrafil® J-1305/CF/30/TF/15 NAT | Techmer Engineered Solutions | PPS | Electrafil® |
| Kemcor LD 5270 | Qenos Pty Ltd | LDPE | Kemcor |
