Order Products : sales@su-jiao.com
AlphaSeal™ 240-6CY BLUE 7002
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | AlphaGary |
| Trademark: | AlphaSeal™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oIOgNc_AlphaSeal-240-6CY-BLUE-7002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ALPHASEAL™ 240-6CY is an elastomeric material made for extrusion and molding of FDA sanctioned materials for food contact applications. It is formulated for low taste and odor and exhibits good elastic recovery, abrasion resistance and low temperature behavior. This material is made to tight, exacting specifications. Non-food contact applications are also possible for 240-6CY. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.908 to 0.948 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 6.35 mm | 92 to 98 | ||
| Shore A, 15 sec, 6.35 mm | 90 to 96 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 100% Secant (1.91 mm) | 7.00 | MPa | ASTM D638 |
| Tensile Strength (1.91 mm) | 11.7 | MPa | ASTM D638 |
| Tensile Elongation (Break, 1.91 mm) | 550 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 76.2 | kN/m | ASTM D1004 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 177 to 193 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 177 to 193 | °C |
| Note Message | |
|---|---|
| 1 . | Graves |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205 TFE 10 | RTP Company | Nylon 66 | RTP |
| Vistamaxx™ 3980FL | ExxonMobil Chemical | PP Elastomer | Vistamaxx™ |
| Diakon® ST15G6 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| HiFill® PA12 GF20 L | Techmer Engineered Solutions | Nylon 12 | HiFill® |
| Lupoy® GN1006FT | LG Chem Ltd. | PC | Lupoy® |
