Order Products : sales@su-jiao.com
Taitalac® 1002
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Taita Chemical Company, Ltd. |
| Trademark: | Taitalac® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oGI4XY_Taitalac-1002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Taitalac ABS 1002 is a high flow resin that features outstanding processability and high productivity. Uses include large or complex shaped products, TV housings, vacuum cleaners, various leisure goods, air conditioners, cash registers and floppy disks. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 2.3 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.30 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 112 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C, 3.18mm | 40.7 | MPa | ASTM D638 |
| Fracture, 23°C, 3.18mm | 35.2 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 30 | % | ASTM D638 |
| Flexural Modulus 1(23°C) | 2550 | MPa | ASTM D790 |
| Flexural Strength 2(Yield, 23°C) | 71.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 12.7 mm) | 230 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 82.8 | °C | ASTM D648 |
| Vicat Softening Temperature | 97.8 | °C | ASTM D1525 |
| RTI Elec (1.57 mm) | 60.0 | °C | UL 746 |
| RTI Imp (1.57 mm) | 60.0 | °C | UL 746 |
| RTI (1.57 mm) | 60.0 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| High Amp Arc Ignition (HAI) (1.57 mm) | 200 | UL 746 | |
| High Voltage Arc Tracking Rate (HVTR) (1.57 mm) | 0.00254 | mm/min | UL 746 |
| Hot-wire Ignition (HWI) (1.57 mm) | 16 | sec | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.59 mm) | HB | UL 94 |
| Additional Information |
|---|
| Melt Flow Rate, ASTM D1238, 200°C, 5kg: 1.5 to 3.0 g/10min |
| Note Message | |
|---|---|
| 1 . | 2.8 mm/min |
| 2 . | 2.8 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumikon® EME-7720TA | Sumitomo Bakelite Co., Ltd. | Epoxy | Sumikon® |
| Network Polymers Nylon 6001GF33 | Network Polymers, Inc. | Nylon 6 | Network Polymers Nylon |
| Adell Polyamide BT-13 General Purpose | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| AT 280 | Celanese EVA Performance Polymers | LDPE | AT |
| POFEX 8200EP90F | POLYROCKS CHEMICAL CO., LTD | TPE | POFEX |
