Order Products : sales@su-jiao.com
HANWHA LLDPE 3306W
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Hanwha Chemical |
| Trademark: | HANWHA LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oFGWp6_HANWHA-LLDPE-3306W.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HANWHA LLDPE 3306W is manufactured by Spherilene process and designed for general purpose film. LLDPE 3306W has well balanced property of mechanical property and processability. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.8 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 22.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 900 | % | ASTM D638 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 20 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 20 µm | 34.3 | MPa | ASTM D882 |
| TD : Break, 20 µm | 24.5 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 20 µm | 500 | % | ASTM D882 |
| TD : Break, 20 µm | 800 | % | ASTM D882 |
| Dart Drop Impact (20 µm) | 45 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 20 µm | 30 | g | ASTM D1922 |
| TD : 20 µm | 430 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 102 | °C | ASTM D1525 |
| Peak Melting Temperature | 123 | °C | Internal method |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze (20.0 µm) | 2.0 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 300 | °C |
| Extrusion instructions |
|---|
| Optimum Gage Range: 0.02 to 0.04 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ResMart Plus Nylon 6 6 | ResMart | Nylon 66 | ResMart Plus |
| Dutral® CO 038 PL | Versalis S.p.A. | EPDM | Dutral® |
| ELASTOSIL® R plus 4066/60 | Wacker Chemie AG | Silicone | ELASTOSIL® R plus |
| Estaloc® 59104 RETPU | Lubrizol Advanced Materials, Inc. | TPU-Polyester | Estaloc® |
| INSPIRE™ TF1502 ESU | Trinseo | PP, Unspecified | INSPIRE™ |
