Order Products : sales@su-jiao.com
ROTOLENE® 93050
| Category: | LMDPE , Linear Medium Density Polyethylene |
| Manufacturer: | Polimeros Mexicanos s.a. de c.v. |
| Trademark: | ROTOLENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oEveMK_ROTOLENE-93050.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Linear Medium Density Polyethylene Copolymer, with U.V. stabilizer. Colors: Natural & Several Colors USES: Polyethylene of maximum quality, for manufacture water tanks, containers, excellent for doing foamed internal layer in colors, given high whiteness, with a fine finished in the outer color layer and fine texture. Resin used as a base of compounds SEVERAL COLORS & ROTOFOAM in WHITE and CRISTALBLUE colors. This product have to contain all requirements of the U.S. Food and Drugs Administration, covering safe use of polyethylene articles for direct food contact. 21 CFR 177.1520. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Bulk Factor | 0.33 to 0.39 | ASTM D1895 | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.2 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal | 300 | hr | |
| 100% Igepal | > 1000 | hr | |
| Particle Size - 35 mesh | < 2.00 | % | ASTM D1921 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Impact (3.18 mm) | 200 | J/m | ARM |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pourability | 1500.00 to 2400.00 | g/10 min | ASTM D1895 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 18.6 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 12 | % | ASTM D638 |
| Flexural Modulus 2 | 689 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 50.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Promyde® B30 P2 G30 U0 | NUREL, S.A. | Nylon 6 | Promyde® |
| SABIC® PP 5703P | SABIC Americas, Inc. | PP Homopolymer | SABIC® PP |
| MOSTEN MB 720 | UNIPETROL RPA | PP Impact Copolymer | MOSTEN |
| ISOTHANE® 1065D | Great Eastern Resins Industrial Co Ltd (GRECO) | TPU-Polyester | ISOTHANE® |
| OP - PBT 30GF-FR | Oxford Polymers | PBT | OP - PBT |
