Order Products : sales@su-jiao.com
Westlake LDPE EC850AA
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oEWfDm_Westlake-LDPE-EC850AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| WESTLAKE low-density polyethylene EC850 is a resin designed for applications where high coating speeds and good drawdown are required. The combination of high melt index and low density provides good heat seals at high packaging or sealing rates. It also demonstrates good adhesion to paper, provides a good moisture barrier, and is heat-sealable at low temperatures. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.915 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 13 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break, 23°C) | 9.70 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 23°C) | 400 | % | ASTM D638 |
| Flexural Modulus - 2% Secant 3(23°C) | 172 | MPa | ASTM D790 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 302 to 329 | °C |
| Note Message | |
|---|---|
| 1 . | Type IV, 500 mm/min |
| 2 . | Type IV, 500 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Zytel® 158L NC010 | DuPont Performance Polymers | Nylon 612 | Zytel® |
| Extreme™ D | Spartech Plastics | TPO | Extreme™ |
| FHR EPS 40-5640 | Flint Hills Resources, LP | PS (EPS) | FHR EPS |
| DOMAMID® 66G30V0AH | DOMO Engineering Plastics SPA | Nylon 66 | DOMAMID® |
| Hostacom 65F4-2 | LyondellBasell Industries | PP Homopolymer | Hostacom |
