Order Products : sales@su-jiao.com

ESENTTIA 02R01CA-1

Category:	PP Random Copolymer , Polypropylene Random Copolymer
Manufacturer:	Polipropileno del Caribe S.A.
Trademark:	ESENTTIA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	oE1M8Q_ESENTTIA-02R01CA-1.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Characteristics: High ethylene Random copolymer polypropylene with very good optical properties; very good impact resistance; with clarify and antistatic additives.

Recommended for: High clarity and very high impact resistance extrusion and injection blow molding containers; high transparency and stiff co-extruded blown films; high clarity general purpose sheet extrusion applications; impact and clarity modifier of homopolymer sheet extrusion and extrusion blow molding containers.

General Information
Additive	Antistatic Clarifier
Features	Antistatic Food Contact Acceptable High Clarity High Impact Resistance High Stiffness Opticals Random Copolymer
Uses	Blown Film Containers Sheet
Agency Ratings	EC 1907/2006 (REACH) EC 1935/2004 EC 2023/2006 EU 10/2011 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(b) FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Blown Film Coextrusion Extrusion Blow Molding Injection Blow Molding Sheet Extrusion

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) ¹(230°C/2.16 kg)	1.6	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield, 3.20 mm, Injection Molded)	23.4	MPa	ASTM D638
Tensile Elongation ³(Yield, 3.20 mm, Injection Molded)	15	%	ASTM D638
Flexural Modulus - 1% Secant ⁴(3.20 mm, Injection Molded)	772	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	480	J/m	ASTM D256A
Gardner Impact ⁵(23°C, 3.20 mm, Injection Molded)	29.4	J	ASTM D5420

Note Message
1 .	Procedure B
2 .	Type I, 50 mm/min
3 .	Type I, 50 mm/min
4 .	Type I, 1.3 mm/min
5 .	Method A

Resin Grade	Manufacturer	Category	Trademark
POLYMAN® (PC) XP 41 R 20 GF	A. Schulman Europe	PC	POLYMAN®
RheTech Polypropylene GC20P100-04	RheTech, Inc.	PP, Unspecified	RheTech Polypropylene
Sarlink® TPE ML-1255B	Teknor Apex Company	TPE	Sarlink® TPE
LUVOCOM® 1-7384/EG/GY	Lehmann & Voss & Co.	Nylon 66	LUVOCOM®
Durethan® BM 430 H2.0 901510	LANXESS GmbH	Nylon 6	Durethan®