Order Products : sales@su-jiao.com
CABELEC® CC6277
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | Cabot Corporation |
| Trademark: | CABELEC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oCWHok_CABELECCC6277.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CABELEC CC6277 conductive concentrate is an electrically conductive concentrate made from a well-selected carbon black finely dispersed in polyethylene resins. Its electrical and mechanical properties are not dependent on atmospheric conditions however, they depend on the type and level of dilution of the resin used and the processing conditions. Unlike standard conductive compounds, which have very limited dilution potential, CABELEC CC6277 conductive concentrate has the potential to be diluted with a high quantity of natural resin (see chart hereafter). This allows users of CABELEC CC6277 conductive concentrate to benefit from the versatility of this concentrate and from the enhanced physical properties due to higher levels of dilution resin. Applications CABELEC CC6277 conductive concentrate can reduce the hazards of electrostatic discharge in applications such as polypropylene based conductive slit tape and polypropylene Flexible Intermediate Bulk Containers (FIBCs). |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.15 | g/cm³ | Internal method |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 4.0 | g/10 min | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | Internal method | ||
| Yield 1 | 30.0 | MPa | Internal method |
| Yield 2 | 35.0 | MPa | Internal method |
| Yield 3 | 33.0 | MPa | Internal method |
| Yield 4 | 31.0 | MPa | Internal method |
| Yield 5 | 29.0 | MPa | Internal method |
| Fracture 6 | 42.0 | MPa | Internal method |
| Fracture 7 | 41.0 | MPa | Internal method |
| Fracture 8 | 34.0 | MPa | Internal method |
| Fracture 9 | 29.0 | MPa | Internal method |
| Fracture 10 | 27.0 | MPa | Internal method |
| Tensile Strain | |||
| Yield 11 | 10 | % | Internal method |
| Yield 12 | 11 | % | Internal method |
| Yield 13 | 12 | % | Internal method |
| Fracture 14 | 1000 | % | Internal method |
| Fracture 15 | 920 | % | Internal method |
| Fracture 16 | 730 | % | Internal method |
| Fracture 17 | 110 | % | Internal method |
| Fracture 18 | 16 | % | Internal method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 4.0 | hr | |
| Cylinder Zone 1 Temp. | 200 - 230 | °C | |
| Cylinder Zone 3 Temp. | 200 - 230 | °C | |
| Cylinder Zone 5 Temp. | 200 - 230 | °C |
| Note Message | |
|---|---|
| 1 . | Addition level of CABELEC CC6277: 30% |
| 2 . | Addition level of CABELEC CC6277: 40% |
| 3 . | Addition level of CABELEC CC6277: 50% |
| 4 . | Addition level of CABELEC CC6277: 60% |
| 5 . | Addition level of CABELEC CC6277: 70% |
| 6 . | Addition level of CABELEC CC6277: 30% |
| 7 . | Addition level of CABELEC CC6277: 40% |
| 8 . | Addition level of CABELEC CC6277: 50% |
| 9 . | Addition level of CABELEC CC6277: 60% |
| 10 . | Addition level of CABELEC CC6277: 70% |
| 11 . | Addition level of CABELEC CC6277: 30% |
| 12 . | Addition level of CABELEC CC6277: 50% |
| 13 . | Addition level of CABELEC CC6277: 70% |
| 14 . | Addition level of CABELEC CC6277: 30% |
| 15 . | Addition level of CABELEC CC6277: 40% |
| 16 . | Addition level of CABELEC CC6277: 50% |
| 17 . | Addition level of CABELEC CC6277: 60% |
| 18 . | Addition level of CABELEC CC6277: 70% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4405 TFE 5 | RTP Company | Nylon, Unspecified | RTP |
| SABIC® HDPE B6246 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
| WPP PP PPHIFR | Washington Penn Plastic Co. Inc. | PP Homopolymer | WPP PP |
| Compoceran E201 | Arakawa Chemical Industries, Ltd. | Epoxy | Compoceran |
| Evolue™ SP0511 | Prime Polymer Co., Ltd. | LLDPE | Evolue™ |
