Order Products : sales@su-jiao.com
INEOS Wire & Cable BPD2000E
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | INEOS Olefins & Polymers Europe |
| Trademark: | INEOS Wire & Cable |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oBlZHb_INEOS-Wire-Cable-BPD2000E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BPD2000E is an unstabilised and clean low density polyethylene. Applications BPD2000E is designed for use in Medium/High Voltage (MV/HV) power cables insulation using the direct peroxide injection (DPI) process and applications requesting extra cleanliness. Suitability of BPD2000E for insulation of HV cables and voltage limitation depend on experience acquired and validations undergone by the cable manufacturer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.923 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, 23°C) | 18.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | > 500 | % | ISO 527-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | > 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength 1 | > 22 | kV/mm | ASTM D149 |
| Dielectric Constant (50 Hz) | 2.30 | ASTM D150 | |
| Dissipation Factor (50 Hz) | 3.0E-4 | ASTM D150 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 135 to 145 | °C |
| Note Message | |
|---|---|
| 1 . | Method A (Short-Time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenac™-C GN455 | Asahi Kasei Chemicals Corporation | Acetal (POM) Copolymer | Tenac™-C |
| SUPREME GPPS SC206E | Supreme Petrochem Ltd. | PS (GPPS) | SUPREME GPPS |
| LNP™ STAT-KON™ RFD02 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ STAT-KON™ |
| Paracril® CV80 | INSA | NBR | Paracril® |
| Vipel® K022-ACP-20 | AOC, L.L.C. | Vinyl Ester | Vipel® |
