Order Products : sales@su-jiao.com
Solef® 20808
| Category: | PVDF , Polyvinylidene Fluoride |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Solef® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | o89hmc_Solef-20808.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Solef® 20808 is a Polyvinylidene Fluoride (PVDF) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Important attributes of Solef® 20808 are:
|
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.4 | g/10 min | ASTM D1238 |
| Water Absorption (23°C, 24 hr) | < 0.040 | % | ISO 62 |
| Density | 1.783 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hardness - Shore D (2.00 mm) | 71.0 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Resistance | 29.0 | mg | ASTM D4060 |
| Coefficient of Friction - dynamic | 0.280 | ASTM D1894 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Izod Impact - (notched V10 mm at 23°C, 4mm thick) | 86.0 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Linear Thermal Expansion | 1.4E-4 to 1.6E-4 | cm/cm/°C | ASTM D696 |
| Crystallization Heat | 35.0 | J/g | ASTM D3417 |
| Crystallization Point | 120 | °C | ASTM D3418 |
| Glass Transition Temperature - (Tg) | -50.0 | °C | ASTM D4065 |
| Heat of Fusion | 35.0 | J/g | ASTM D3418 |
| Thermal Stability - (weight loss 1% in air) | 410 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant - at 1MHz | 6.80 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flammability | V-0 | UL 94 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(23°C) | 1080 | MPa | ASTM D638 |
| Tensile Strength 2 | ASTM D638 | ||
| Yield, 23°C | 33.0 | MPa | |
| Break, 23°C | 56.0 | MPa | |
| Tensile Elongation 3 | ASTM D638 | ||
| Yield, 23°C | 10 | % | |
| Break, 23°C | 600 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 148 | °C | ASTM D3418 |
| Specific Heat | ASTM C351 | ||
| 23°C | 1200 | J/kg/°C | |
| 100°C | 1600 | J/kg/°C | |
| Thermal Conductivity (23°C) | 0.20 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+14 | ohms | ASTM D257 |
| Volume Resistivity 4 | > 1.0E+14 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.00 mm) | 44 | % | ASTM D2863 |
| Note Message | |
|---|---|
| 1 . | 1.0 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 10 mA after 2 min at 23°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stylac™ ID31J | Asahi Kasei Chemicals Corporation | ABS | Stylac™ |
| Unichem 7099 | Colorite Polymers | PVC, Unspecified | Unichem |
| YUPLENE® BH3520 | SK Global Chemical | PP Impact Copolymer | YUPLENE® |
| Eraclene® MR 80 U | Versalis S.p.A. | HDPE | Eraclene® |
| Braskem PP C7070-35N | Braskem Europe GmbH | PP Impact Copolymer | Braskem PP |
