Order Products : sales@su-jiao.com
CERTENE™ MWG-2137
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | o7Lbgm_CERTENE-MWG-2137.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| MWG-2137 is a certified prime Hexane copolymer, HIGH MOLECULAR WEIGHT grade developed for GEOMEMBRANE applications. MWG-2137 features outstanding ESCR, excellent melt strength and good processability. MWG-2137 applications include liners for landfills, moisture barrier for tunnels and chemical tank containment liners. MWG-2137 complies with FDA regulation 21CFR 177.1520 (c) 3.1(a), use conditions C through G per 21 CFR 176.170(c). Volume of food contacting article must be equal to or greater than 5 gallons. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.937 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 21 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal) | > 1500 | hr | ASTM D1693 |
| SP-NCTL - Compression Molded | > 1.2 | month | ASTM D5397 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 57 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 20.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 800 | % | ASTM D638 |
| Flexural Modulus - Tangent (Compression Molded) | 830 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength 1(Compression Molded) | 400 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746A |
| Vicat Softening Temperature | 105 | °C | ASTM D1525 |
| Additional Information |
|---|
| Test specimens from compression molded plaque according to ASTM D 4703, Procedure C, Annex A1. |
| Note Message | |
|---|---|
| 1 . | Type S bar |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Topolymer® 5321-751E | Dongguan Top Polymer Enterprise | TPE | Topolymer® |
| Nipol® 1031 | Zeon Chemicals L.P. | NBR | Nipol® |
| Braskem PP CP350WV | Braskem America Inc. | PP Homopolymer | Braskem PP |
| Fainplast PVC RKS 316/W | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
| Parylene HT® | Specialty Coating Systems (SCS) | PPX | Parylene |
