Order Products : sales@su-jiao.com
Stat-Tech™ PC-CB2/000 CR
| Category: | PC , Polycarbonate |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Stat-Tech™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | o2qru7_Stat-Tech-PC-CB2-000-CR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Stat-Tech™ PC-CB2/000 CR XP100827 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 to 1.23 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.50 to 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2070 to 3450 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 55.2 to 72.4 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 3.0 to 7.0 | % | ASTM D638 |
| Flexural Modulus | 1720 to 3100 | MPa | ASTM D790 |
| Flexural Strength | 89.6 to 103 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 6.35 mm, Injection Molded) | 37 to 53 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.18 mm | 123 | °C | |
| 1.8 MPa, Unannealed | 112 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+3 to 1.0E+5 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+2 to 1.0E+4 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 to 130 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Processing (Melt) Temp | 300 to 320 | °C | |
| Mold Temperature | 90.0 to 110 | °C |
| Note Message | |
|---|---|
| 1 . | Type I, 5.1 mm/min |
| 2 . | Type I, 5.1 mm/min |
| 3 . | Type I, 5.1 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sunny® PBT-PET EN130 | Guangdong Shunde Shunyan New Material Co., Ltd. | PBT+PET | Sunny® |
| NANCAR® 1022 | Nantex Industry Co., Ltd. | NBR | NANCAR® |
| Complet® LGF40-PA66 MT | PlastiComp, Inc. | Nylon 66 | Complet® |
| ETILINAS LL0220AA | POLYETHYLENE MALAYSIA SDN BHD | LLDPE | ETILINAS |
| INSTRUC PESGF10 | Infinity LTL Engineered Compounds | PESU | INSTRUC |
