Order Products : sales@su-jiao.com

ISPLEN® PB 170 G1F

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	nvBegS_ISPLEN-PB-170-G1F.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

ISPLEN® PB 170 G1F is a medium-high fluidity heterophasic copolymer characterised by its good balance of properties.
It is characterised by good balance of properties: High stifness, good impact strength even at low temperatures, low gel level, good clarity films and easy processability. Also its particular characteristics offer a multi-purpose grade largely used in the consumer, packaging and a wide variety of appliance industries.

TYPICAL APPLICATIONS
Non oriented film extrusion processes, cast or tubular quench:

Single layer films

Core-layer in co-extruded cast films

Packaging of foodstuffs and non-food stuffs

Stationery packaging

Recommended melt temperature range from 190 to 230°C. Processing conditions should be optimised for each production line.

General Information
Features	Food Contact Acceptable Good Impact Resistance Good Processability High Stiffness Low Gel Low Temperature Impact Resistance Medium Clarity Medium Flow
Uses	Cast Film Film Food Packaging Non-oriented Film Packaging Stationary Supplies
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Cast Film Coextrusion Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	12	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	62		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	1200	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	8.0	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	85.0	°C	ISO 75-2/B

Extrusion	Nominal Value	Unit
Melt Temperature	190 to 230	°C

Resin Grade	Manufacturer	Category	Trademark
SAN 140	Trinseo	SAN	SAN
Stanyl® TW241F12	DSM Engineering Plastics	Nylon 46	Stanyl®
EnCom GF10 PPE-PS	EnCom, Inc.	PPE+PS	EnCom
Kingfa JH960 6300	Kingfa	PC+ABS	Kingfa
LNP™ THERMOCOMP™ Lexan_LGK5030 compound	SABIC Innovative Plastics Asia Pacific	PC	LNP™ THERMOCOMP™