Order Products : sales@su-jiao.com
PPR ABS03
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Premier Plastic Resins, Inc. |
| Trademark: | PPR |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nuXhPT_PPR-ABS03.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PPR ABS03 is an acrylonitrile butadiene styrene (ABS) product,. It can be processed by injection molding and is available in North America. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 48.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 18 | % | ASTM D638 |
| Flexural Modulus - Tangent | 2760 | MPa | ASTM D790 |
| Flexural Strength | 76.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 270 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 103 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 96.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 77.0 - 82.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 227 - 254 | °C | |
| Middle Temperature | 232 - 260 | °C | |
| Front Temperature | 232 - 260 | °C | |
| Nozzle Temperature | 243 - 254 | °C | |
| Processing (Melt) Temp | 227 - 260 | °C | |
| Mold Temperature | 49.0 - 77.0 | °C | |
| Injection Pressure | 5.00 - 55.0 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 3.00 - 45.0 | MPa | |
| Back Pressure | 0.00 - 1.00 | MPa | |
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Screw Speed: Moderate-FastDecompression: 3.81 to 7.6 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nipoflex® 633 | TOSOH Corporation | EVA | Nipoflex® |
| En Chuan 601 | En Chuan Chemical Industries Co,. Ltd. | Polyester, TS | En Chuan |
| Glastic® CBC | Glastic Corporation | Polyester, TS | Glastic® |
| IZTAVIL P-450 | Mexichem Corporativo | PVC Homopolymer | IZTAVIL |
| O'Tech OW 836 | O'Tech Corporation | PVC, Unspecified | O'Tech |
