Order Products : sales@su-jiao.com
DOW™ LDPE 4010
| Category: | LDPE , Low Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ntNbAO_DOW-LDPE-4010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dow Polyethylene LDPE 4010 is a general purpose Extrusion Coating Resin. It complies with:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 8.00 | MPa | ISO 527-2 |
| -- | 12.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 500 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 89.0 | °C | ASTM D1525 |
| Melting Temperature (DSC) | 105 | °C | Internal method |
| Additional Information |
|---|
| Selection note: WVTR: Lyssy or Mocon Chill roll: matte or glossy Air gap:250mm or 200mm Nip Off-set : -15mm or 0mm Tset: 260, 290 or 320°C Substrate: Paper type (e.g. Kraft Paper) or Film type (OPP) - weight in g/m² or thickness in micron |
| Extrusion | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Neck-in 1(290°C) | 100.0 | mm | Internal method |
| Drop down 2(290°C) | 230 | m/min | Internal method |
| Minimum coating weight- Calculated 3(290°C) | 7.0 | g/m² | Internal method |
| Extrusion instructions |
|---|
| Fabrication Conditions for Extrusion Coatings: Laminator settings applied for extrusion processing: Air-gap = 250 mm Nip-off set = -15 mm Chill Roll glossy |
| Note Message | |
|---|---|
| 1 . | 25g/m² coatings at selected running conditions |
| 2 . | Acceleration from 15g/m² coating at selected set extruder temperature |
| 3 . | Acceleration from 15g/m² coating at selected setextruder temperature |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTV-2 XP-382 | Silicones, Inc. | Silicone Rubber, RTV-2 | RTV-2 |
| Torelina® A575W20 | Toray Resin Company | PPS | Torelina® |
| Flontech® FT-EK10-6 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Jam PE 22502 | Jam Petrochemical Company | LLDPE | Jam PE |
| PLUSTEK RA325G5 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
