Order Products : sales@su-jiao.com
Witcom PP C/4G-EC-EM-HS
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Witcom Engineering Plastics B.V. |
| Trademark: | Witcom PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nsq3G9_Witcom-PP-C-4G-EC-EM-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Witcom PP C/4G-EC-EM-HS is a polypropylene copolymer (PP Copoly) product, which contains a 20% glass fiber reinforced material. It can be processed by injection molding and is available in Europe. Features include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow (3.00 mm) | 0.40 - 0.70 | % | ISO 2577 |
| Water Absorption | ISO 62 | ||
| Saturated, 23°C | 0.020 | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 0.010 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 65.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.0 - 4.0 | % | ISO 527-2 |
| Flexural Modulus | 4500 | MPa | ISO 178 |
| Flexural Stress | 95.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 14 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength | 40 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 135 | °C | ISO 75-2/A |
| CLTE - Flow | 5.5E-5 | cm/cm/°C | ISO 11359-2 |
| RTI Imp (3.00 mm) | 75.0 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+2 - 1.0E+4 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | ISO 1210 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Processing (Melt) Temp | 200 - 260 | °C | |
| Mold Temperature | 40.0 - 80.0 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.00 - 1.00 | MPa |
| Injection instructions |
|---|
| Screw speed: 0.1 - 0.25 m/sInjection pressure: Keep to a minimumHold pressure: Keep to a minimum |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vyncolit® RX®1-501AN (Nylon) | Vyncolit N.V. | DAP | Vyncolit® |
| Fainplast PVC RE 620 | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
| Guardian III™ PI | S&E Specialty Polymers, LLC | PVC, Unspecified | Guardian III™ |
| MAJORIS BGR310 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
| Hypro-G™ PP-CP45 | Entec Polymers | PP Impact Copolymer | Hypro-G™ |
