Order Products : sales@su-jiao.com
REVOLVE® N-250
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | Matrix Polymers |
| Trademark: | REVOLVE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nsWnv6_REVOLVE-N-250.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Revolve N-250 is a rotational moulding polyethylene general purpose grade. It has been designed to provide wide processing window, excellent mouldability without compromising impact strength. The grade is UV8 stabilised and it is the base of all standard colours and mottle effects. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 7.0 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal | 50.0 | hr | |
| 100% Igepal | 1000 | hr |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 16.8 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 645 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| ARM Impact (-40°C, 3.00 mm) | 102 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 47.0 | °C | ISO 75-2/B |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAC® PA-765A | CHI MEI CORPORATION | ABS | POLYLAC® |
| Resinoid 7003S | Resinoid Engineering Corporation | Phenolic | Resinoid |
| Generic PVC Elastomer | Generic | PVC Elastomer | Generic |
| LUVOCOM® 80-8387/EM | LEHVOSS Group | Acetal (POM) Copolymer | LUVOCOM® |
| EPAMOULD EP80 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
