Order Products : sales@su-jiao.com
ResMart Ultra Nylon 6 6
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | ResMart |
| Trademark: | ResMart Ultra |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nrMEyg_ResMart-Ultra-Nylon-6-6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| High performance polyamid 6 6 for injection molding and extrusion applications (Natural) |
| General Information | |
|---|---|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792, ISO 1183 |
| Molding Shrinkage | |||
| Flow : 3.18mm | 1.3 - 1.7 | % | ASTM D955 |
| Vertical flow direction | 1.8 | % | ISO 294-4 |
| Water Absorption (Saturation) | 1.9 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| Yield | 82.0 | MPa | ISO 527-2 |
| -- | 82.7 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | > 10 | % | ASTM D638 |
| Flexural Modulus | 2900 | MPa | ASTM D790, ISO 178 |
| Flexural Strength | |||
| -- | 103 | MPa | ASTM D790 |
| -- | 94.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | No Break | ISO 179 | |
| Notched Izod Impact | |||
| 23°C, 3.18 mm | 120 | J/m | ASTM D256 |
| 23°C | 4.7 | kJ/m² | ISO 180 |
| Unnotched Izod Impact (3.18 mm) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 200 | °C | ASTM D648, ISO 75-2/B |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (0.711 mm) | V-2 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 82.2 | °C | |
| Drying Time - Desiccant Dryer | 3.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.18 | % | |
| Processing (Melt) Temp | 277 - 299 | °C | |
| Mold Temperature | 48.9 - 90.6 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Dew Point: 0°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMOFIN PPC365T8 | Polyram Ram-On Industries | PP Copolymer | RAMOFIN |
| TOLEN H031 BF | SIBUR, LLC | PP Homopolymer | TOLEN |
| Ultrason® P 3010 MR SW 10101 | BASF Corporation | PPSU | Ultrason® P |
| Zytel® 103FHS BKB009 | DuPont Performance Polymers | Nylon 66 | Zytel® |
| NaturePlast NPC 012 | NaturePlast | Biodeg Polymers | NaturePlast |
