Order Products : sales@su-jiao.com
KRYSTALFLEX™ PE501
| Category: | PUR-Eth,aliphat , Polyurethane (Polyether, Aliphatic) |
| Manufacturer: | Huntsman Corporation |
| Trademark: | KRYSTALFLEX™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nq3B86_KRYSTALFLEX-PE501.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KRYSTALFLEX PE501 is a high performance aliphatic polyether film intended for processing by lamination into a range of glass/plastics components. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 95 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ASTM D412 | ||
| 100% strain | 12.4 | MPa | ASTM D412 |
| 300% strain | 34.5 | MPa | ASTM D412 |
| Tensile Strength 2(Yield) | 44.8 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 350 | % | ASTM D412 |
| Tear Strength | 102 | kN/m | ASTM D624 |
| Additional Information |
|---|
| Softening Range, TMA: 195 to 300°FTypical Laminating Parameters:Ultimate Temperature: 230 to 284°FUltimate Pressure: 116 to 174 psiSoaking Time: 30 min/0.25 in |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| 3 . | 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Pro-fax EP549U | LyondellBasell Industries | PP Impact Copolymer | Pro-fax |
| Sylvin 5150-65 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| BP Flex D 5512 RU BLK | Buckeye Polymers, Inc. | TPO | BP Flex |
| Braskem PP HP 522J | Braskem | PP Homopolymer | Braskem PP |
| HiFill® ABS GF20 FR | Techmer Engineered Solutions | ABS | HiFill® |
