Order Products : sales@su-jiao.com
Alpha PVC 2212RHT/1-118 CLEAR 080X
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nof6mL_Alpha-PVC-2212RHT-1-118-CLEAR-080X.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 2212RHT/1-118 CLEAR 080X is a non-toxic high-flow, clear rigid PVC composition primarily designed for injection molding. This compound provides high thermal stability for easy processing into medical device components such as fistulas, luers, hubs, connectors, drip chambers, etc. Representative samples of this compound showed exceptional resistance to radiation sterilization and passed USP Class VI biocompatibility tests for medical devices. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 - 1.34 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 13 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D, 10 seconds, 3.18mm | 74 - 80 | ASTM D2240 | |
| Shaw D, 15 seconds, 6.35mm | 73 - 79 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1830 | MPa | ASTM D638 |
| Tensile Strength (1.91 mm) | 44.8 | MPa | ASTM D638 |
| Tensile Elongation (Break, 1.91 mm) | 10 | % | ASTM D638 |
| Flexural Modulus (3.18 mm) | 2650 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 78.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | 640 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 63.9 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 160 | °C | |
| Middle Temperature | 166 | °C | |
| Front Temperature | 171 | °C | |
| Nozzle Temperature | 174 | °C | |
| Processing (Melt) Temp | 177 - 182 | °C |
| Injection instructions |
|---|
| Zone 4: 345°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trademark PE LLH2942 | Trademark Plastics Corporation | LLDPE | Trademark PE |
| Bapolan® PS6050 | Bamberger Polymers, Inc. | PS (GPPS) | Bapolan® |
| DINALON® A1S25 G15 | Grupo Repol | Nylon 66 | DINALON® |
| elitel UE3660 | UNITIKA Plastics Division | TPC-ET | elitel |
| Hostacom TRC 787N E1 G14008 | LyondellBasell Industries | PP Copolymer | Hostacom |
