Order Products : sales@su-jiao.com
Edistir® N 3982
| Category: | PS (GPPS) , General Purpose Polystyrene |
| Manufacturer: | Versalis S.p.A. |
| Trademark: | Edistir® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | noaHNA_EdistirN3982.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
General purpose polystyrene with good flow and high heat resistance. N 3982 belongs to Edistir® GPPS third generation. The third generation of versalis GPPS distinguished for a colour more brilliant and neutral in line with more sophisticated market needs. Special grade for direct gassing extrusion of heavy gauge insulating boards (XPS) foamed by blowing agents alternative to CFC and HCFC. Low viscosity process-aid and modifier for compounding. Designation: Thermoplastics ISO 1622-PS,E,105-20. Applications XPS insulation panels with improved environmental compatibility. Carrier of masterbatch. Modifier for thermoplastic elastomers and rubber (shoe soles, cable extrusion-coating). |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | ISO 1183 |
| Apparent Density | 0.65 | g/cm³ | ISO 60 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 25 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.30 - 0.60 | % | ISO 294-4 |
| Water Absorption (23°C, 24 hr) | < 0.10 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3150 | MPa | ISO 527-2/1 |
| Tensile Stress (Break) | 30.0 | MPa | ISO 527-2/5 |
| Tensile Strain (Break) | 1.0 | % | ISO 527-2/5 |
| Flexural Stress 1 | 40.0 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load 2(1.8 MPa, Annealed) | 89.0 | °C | ASTM D648 |
| Vicat Softening Temperature | |||
| -- | 89.0 | °C | ISO 306/A50 |
| -- | 101 | °C | ISO 306/B50 |
| CLTE - Flow | 7.0E-5 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.17 | W/m/K | ISO 8302 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.5 mm, ALL) | HB | UL 94 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Designation | Thermoplastics ISO 1622-PS,E,105-20 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 190 - 220 | °C |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 120°C/hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene HP534-00 | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| APEX® 1216 | Teknor Apex Company | PVC, Flexible | APEX® |
| CAPROWAX P™ 70-T215-000 | POLYFEA | Biodeg Polymers | CAPROWAX P™ |
| ICORENE® 9035 | ICO Polymers APAC, A Division of A. Schulman | LMDPE | ICORENE® |
| ULTEM™ DH1004 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
