Order Products : sales@su-jiao.com
DISTRUMID 6 HF
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Distrupol |
| Trademark: | DISTRUMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nm1kBf_DISTRUMID-6-HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DISTRUMID 6 HF is a polyamide 6 (nylon 6) material,. This product is available in Europe,. The main characteristics of DISTRUMID 6 HF are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.14 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.3 | -- | % | ASTM D955 |
| Water Absorption (24 hr) | 1.3 | -- | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | 106 | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength (Yield) | 90.0 | 50.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 60 | 230 | % | ASTM D638 |
| Flexural Modulus | 3000 | 1100 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | 35 | 350 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, not annealed | 186 | -- | °C | ASTM D648 |
| 1.8 MPa, not annealed | 85.0 | -- | °C | ASTM D648 |
| Vicat Softening Temperature | 208 | -- | °C | ASTM D1525 |
| Melting Temperature | 222 | -- | °C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+13 | 1.0E+11 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+15 | 1.0E+11 | ohms·cm | ASTM D257 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | V-2 | -- | UL 94 |
| Additional Information |
|---|
| 干燥 Continuous Service Temperature, S.P., No Stress: 80 °CResistance to Tracking, VDE 0303/1: KC>600 V |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Microthene® G MN72200 | LyondellBasell Industries | LDPE | Microthene® G |
| TECHNYL® eXten D 247F NATURAL | Solvay Engineering Plastics | Nylon 66/610 | TECHNYL® eXten |
| Ultrason® E 2010 G4 MR SW 15102 | BASF Corporation | PESU | Ultrason® E |
| Adell Polyamide AR-37 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| PLUSTEK PA352M6 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
