Order Products : sales@su-jiao.com
Trademark PE HDP0449
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Trademark Plastics Corporation |
| Trademark: | Trademark PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nk15kb_Trademark-PE-HDP0449.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Trademark PE HDP0449 is a High Density Polyethylene product. It can be processed by pipe extrusion or profile extrusion and is available in North America. Applications of Trademark PE HDP0449 include electrical/electronic applications, plumbing/piping/potable water and sheet. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.40 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | > 1000 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 23.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 600 | % | ASTM D638 |
| Flexural Modulus | 1110 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 76.0 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRE-ELEC® CP 1316 | Premix Oy | Polyolefin, Unspecified | PRE-ELEC® |
| ALTECH® PA66 B 2030/209 GF30 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| ASTALAC™ ABS LGE | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| Hax™ HF 4221 | Fainplast Compounds S.r.l | Polyolefin, Unspecified | Hax™ |
| Iupilon® LGH2410M | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
