Order Products : sales@su-jiao.com
Generic PPE
| Category: | PPE , Polyphenylene Ether |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | niU6wi_Generic-PPE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PPE This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.02 to 1.10 | g/cm³ | ASTM D792 |
| 23°C | 1.02 to 1.07 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow (23°C) | 0.59 to 0.61 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.060 to 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2050 to 2720 | MPa | ASTM D638 |
| Tensile Strength | |||
| Yield, 23°C | 39.2 to 76.0 | MPa | ASTM D638 |
| Break, 23°C | 18.0 to 56.3 | MPa | ASTM D638 |
| Break, 23°C | 17.5 to 60.0 | MPa | ISO 527-2 |
| 23°C | 40.0 to 68.9 | MPa | ASTM D638 |
| Tensile Elongation | |||
| Yield, 23°C | 2.3 to 60 | % | ASTM D638 |
| Break, 23°C | 8.8 to 280 | % | ASTM D638 |
| Break, 23°C | 14 to 130 | % | ISO 527-2 |
| Flexural Modulus | |||
| 23°C | 2100 to 2770 | MPa | ASTM D790 |
| 23°C | 100 to 2580 | MPa | ISO 178 |
| Flexural Strength (Yield, 23°C) | 53.9 to 114 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 44 to 380 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 60.0 to 200 | °C | |
| 1.8 MPa, Unannealed | 81.2 to 151 | °C | |
| Vicat Softening Temperature | 140 to 193 | °C | ISO 306 |
| CLTE - Flow | 6.0E-5 to 7.0E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (23°C) | 2.54 | ASTM D150 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TOTAL Polyethylene MDPE HT 514 | TOTAL Refining & Chemicals | MDPE | TOTAL Polyethylene |
| TYNAB® GM80 | Tyne Plastics LLC. | ABS | TYNAB® |
| WPP TPO TPO-277 UVP ZSP | Washington Penn Plastic Co. Inc. | TPO | WPP TPO |
| BMC T60-6002-WG-(15) | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| ALTECH® PA66 ECO 2020/116 GF20 IM | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
