Order Products : sales@su-jiao.com
Safron® C740-25RNA
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Safripol (PTY) LTD |
| Trademark: | Safron® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ng8wcE_Safron-C740-25RNA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Safron® C740-25RNA Polypropylene Resin is a nucleated impact copolymer suitable for thin walled containers requiring impact performance. It is characterized by high impact properties and is produced using controlled rheology allowing for a narrow MWD (molecular weight distribution). This imparts dimensional stability to mouldings. Safron® C740-25RNA Polypropylene Resin contains an antistatic package. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 25 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 58 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Injection Molded) | 20.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 5.0 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 900 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C, injection molding | 5.5 | kJ/m² | ISO 179/1eA |
| 0°C, injection molding | 7.0 | kJ/m² | ISO 179/1eA |
| 23°C, injection molding | 10 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 78.0 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 50.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature 1 | |||
| -- | 144 | °C | ISO 306/A |
| -- | 66.0 | °C | ISO 306/B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 190 | °C | |
| Middle Temperature | 220 - 240 | °C | |
| Front Temperature | 240 - 250 | °C | |
| Nozzle Temperature | 240 | °C |
| Injection instructions |
|---|
| Zone 4 Temperature: 260°C |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Glas® 3101-22 | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| Witcom PP 2008/003 | Witcom Engineering Plastics B.V. | PP, Unspecified | Witcom PP |
| Hostacom ERC213N 2 | LyondellBasell Industries | PP Copolymer | Hostacom |
| Lupol® HI2202B | LG Chem Ltd. | TPO | Lupol® |
| Plenco 07579 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |
