Order Products : sales@su-jiao.com
Tecolen® CP20 MF20 NL XA70
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Eurotec Engineering Plastics |
| Trademark: | Tecolen® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | neinQ6_Tecolen-CP20-MF20-NL-XA70.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PPCP, 20% mineral filled, flame retardant - halogen (RoHS compliant), heat stabilized, natural |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.36 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 3500 | MPa | ISO 527-2 |
| Tensile Stress (Break, 23°C) | 20.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 10 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | ISO 180/1A | ||
| -30°C | 5.0 | kJ/m² | |
| 23°C | 15 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 60.0 | °C | ISO 75-2/A |
| Melting Temperature 1 | 160 to 165 | °C | ISO 11357-3 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+15 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.750 mm | V-0 | ||
| 1.60 mm | V-0 | ||
| Glow Wire Flammability Index (2.00 mm) | 960 | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (2.00 mm) | 725 | °C | IEC 60695-2-13 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | < 60.0 | °C | |
| Processing (Melt) Temp | 200 to 240 | °C | |
| Mold Temperature | 20.0 to 50.0 | °C | |
| Injection Rate | Slow-Moderate | ||
| Holding Pressure | 40.0 to 80.0 | MPa | |
| Back Pressure | Low |
| Note Message | |
|---|---|
| 1 . | 10 K/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Braskem PE S 1522 | Braskem | LDPE | Braskem PE |
| APEX® 82-E254NL-9 | Teknor Apex Company | PVC, Flexible | APEX® |
| DuraStar™ DS3010HF | Eastman Chemical Company | Copolyester | DuraStar™ |
| Panlite庐 G-3320M | TEIJIN LIMITED | PC | Panlite® |
| SABIC® PC PC1800 resin | SABIC Innovative Plastics Asia Pacific | PC | SABIC® PC |
