Order Products : sales@su-jiao.com
Tisester® PBT 30 GFR
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Tisan |
| Trademark: | Tisester® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nbTsEI_Tisester-PBT-30-GFR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Tisester® PBT 30 GFR is a Polybutylene Terephthalate (PBT) material filled with 30% glass fiber. It is available in Africa & Middle East or Europe for injection molding. Primary attribute of Tisester® PBT 30 GFR: Flame Rated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.51 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.30 | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.20 | % | ISO 62 |
| Ash Content | 30 | % | ISO 3451 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 84 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 155 | MPa | |
| Break | 157 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Yield | 2.7 | % | |
| Break | 2.9 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 8.5 | kJ/m² | ISO 180/A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 214 | °C | ISO 75-2/Be |
| Vicat Softening Temperature | 215 | °C | ISO 306/B120 |
| Melting Temperature | 225 to 230 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index (3.00 mm) | 400 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 | |
| Glow Wire Flammability Index (3.00 mm) | 750 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 to 120 | °C | |
| Drying Time | 4.0 to 5.0 | hr | |
| Rear Temperature | 220 to 250 | °C | |
| Middle Temperature | 220 to 250 | °C | |
| Front Temperature | 220 to 250 | °C | |
| Nozzle Temperature | 225 | °C | |
| Processing (Melt) Temp | 220 to 230 | °C | |
| Mold Temperature | 80.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1500-72D TFE 15 | RTP Company | TEEE | RTP |
| Shin-Etsu Elastomer KE-571U | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| Aurora PVC AP2290 Series | Aurora Plastics, Inc. | PVC, Unspecified | Aurora PVC |
| DEXFLEX® 756-68E | LyondellBasell Industries | TPO (POE) | DEXFLEX® |
| INSULCAST® LN 1-05 | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
