Order Products : sales@su-jiao.com
INEOS PP H12G-00
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nWOnEu_INEOS-PP-H12G-00.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Grade H12G-00 is a general purpose homopolymer for injection molding applications. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 13 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 35.2 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, Injection Molded | 10 | % | |
| Break, Injection Molded | > 200 | % | |
| Flexural Modulus (Injection Molded) | 1480 | MPa | ASTM D790A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 82.2 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Absolac® 450H | Styrolution | ABS | Absolac® |
| Cleapact TI-500A | DIC Corporation | SBC | Cleapact |
| Elastollan® C85A10 | BASF Corp. Thermoplastic Polyurethanes | TPU-Polyester | Elastollan® |
| Hifax TKC 407P | LyondellBasell Industries | PP Copolymer | Hifax |
| Kpren CM435 | Shandong Xuye New Materials Co., Ltd. | CM | Kpren |
