Order Products : sales@su-jiao.com

KMI PP KM-003IB

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	KMI Group, Inc.
Trademark:	KMI PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	nWGhvq_KMIPPKM003IB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
KM-003IB is a high isotactic block copolymer which has higher crystallinity, compared to general PP. Due to high crystalline nature & optimum rubber design, BI300 has an excellent property balance between high stiffness and impact strength. Films made from this grade provide high heat resistance and superior mechanical strength, thus this grade is highly suited to retort pouch film application. Food Contact Application: KM-003IB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact. Characteristics: Good balance between stiffness and impact strength High transparency Punch resistance Heat resistance

Message

KM-003IB is a high isotactic block copolymer which has higher crystallinity, compared to general PP. Due to high crystalline nature & optimum rubber design, BI300 has an excellent property balance between high stiffness and impact strength. Films made from this grade provide high heat resistance and superior mechanical strength, thus this grade is highly suited to retort pouch film application.

Food Contact Application:
KM-003IB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact.

Characteristics:

Good balance between stiffness and impact strength

High transparency

Punch resistance

Heat resistance

General Information
Features	Block Copolymer High isotactic Rigidity, high High crystallization Good strength Heat resistance, high Definition, high Compliance of Food Exposure
Uses	Films
Agency Ratings	FDA 21 CFR 177.1520
Appearance	Clear/transparent

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	5.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	109		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	30.4	MPa	ASTM D638
Tensile Elongation (Break)	> 500	%	ASTM D638
Flexural Modulus	1420	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact (23°C)	88	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	109	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
Michilene F8230	API Polymers, Inc.	PP Copolymer	Michilene
Cheng Yu A702G1	Cheng Yu Plastic Company Limited	ABS	Cheng Yu
COPYLENE® CM200LN	Phillips 66	PP Impact Copolymer	COPYLENE®
Geon™ Vinyl Wire & Cable W2403L	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Wire & Cable
MAJORIS AG200	AD majoris	PP, Unspecified	MAJORIS