Order Products : sales@su-jiao.com

Durethan® BG 30 FN05 000000

Category:	Nylon 6 , Polyamide 6
Manufacturer:	LANXESS GmbH
Trademark:	Durethan®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	nUOyvR_DurethanBG30FN05000000.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
PA 6, 30 % glass, injection molding, halogen free flame retardant, low tendency to warp

General Information
Filler / Reinforcement	Glass fiber reinforced material, 30% filler by weight
Additive	Flame retardancy
Features	Low warpage Halogen-free Flame retardancy
Processing Method	Injection molding
Resin ID (ISO 1043)	PA G FR (30)

Physical	Dry	Conditioned	Unit	Test Method
Density (23°C)	1.41	--	g/cm³	ISO 1183
Apparent Density	0.70	--	g/cm³	ISO 60
Molding Shrinkage				ISO 2577
Vertical flow direction : 260°C, 2.00mm ¹	0.80	--	%	ISO 2577
Vertical flow direction : 120°C, 4 hours, 2.00mm ²	0.20	--	%	ISO 2577
Flow direction : 260°C, 2.00mm ³	0.80	--	%	ISO 2577
Flow direction : 120°C, 4 hours, 2.00mm ⁴	0.20	--	%	ISO 2577

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	5400	2000	MPa	ISO 527-2/1
Tensile Stress (Break, 23°C)	75.0	30.0	MPa	ISO 527-2/5
Tensile Strain (Break, 23°C)	2.4	> 20	%	ISO 527-2/5
Flexural Modulus ⁵(23°C)	5200	2000	MPa	ISO 178/A
Flexural Stress				ISO 178/A
3.5% strain, 23°C	--	40.0	MPa	ISO 178/A
23°C ⁶	120	45.0	MPa	ISO 178/A
Flexural Strain at Flexural Strength ⁷(23°C)	3.3	7.0	%	ISO 178/A

Additional Information	Dry	Conditioned		Test Method
ISO Shortname	PA 6, GFHR, 12-050, G30	--		ISO 1874

Injection	Dry	Unit	Test Method
Admissible Residence Time at Tmax		min
Residual Moisture Content	0.030 - 0.070	%	Karl Fisher

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-30°C	< 10	< 10	kJ/m²	ISO 179/1eA
23°C	< 10	< 10	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength				ISO 179/1eU
-30°C	45	28	kJ/m²	ISO 179/1eU
23°C	55	70	kJ/m²	ISO 179/1eU
Notched Izod Impact				ISO 180/1A
-30°C	< 10	< 10	kJ/m²	ISO 180/1A
23°C	< 10	< 10	kJ/m²	ISO 180/1A
Unnotched Izod Impact Strength (23°C)	45	45	kJ/m²	ISO 180/1U

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	95.0	--	°C	ISO 75-2/A
Vicat Softening Temperature	195	--	°C	ISO 306/B120
Ball Pressure Test (201°C)	Pass	--		IEC 60695-10-2
Melting Temperature ⁸	222	--	°C	ISO 11357-3
Linear thermal expansion coefficient				ISO 11359-2
Flow : 23 to 55°C	6.0E-5	--	cm/cm/°C	ISO 11359-2
Lateral : 23 to 55°C	7.0E-5	--	cm/cm/°C	ISO 11359-2

Electrical	Dry	Conditioned	Unit	Test Method
Comparative Tracking Index (CTI)	PLC 0	--		UL 746
Comparative Tracking Index (Solution A)	550	--	V	IEC 60112

Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating				UL 94
0.400 mm	V-0	--		UL 94
0.750 mm	V-0	--		UL 94
1.50 mm	V-0	--		UL 94
3.00 mm	V-0	--		UL 94
Glow Wire Flammability Index				IEC 60695-2-12
0.400 mm	960	--	°C	IEC 60695-2-12
0.750 mm	960	--	°C	IEC 60695-2-12
1.50 mm	960	--	°C	IEC 60695-2-12
3.00 mm	960	--	°C	IEC 60695-2-12
Glow Wire Ignition Temperature				IEC 60695-2-13
0.400 mm	960	--	°C	IEC 60695-2-13
0.750 mm	900	--	°C	IEC 60695-2-13
1.50 mm	800	--	°C	IEC 60695-2-13
3.00 mm	800	--	°C	IEC 60695-2-13

Injection	Dry	Unit	Test Method
Drying Temperature - Dry Air Dryer	80.0	°C
Drying Time - Dry Air Dryer	2.0 - 6.0	hr
Processing (Melt) Temp	250 - 270	°C
Mold Temperature	80.0 - 100	°C

Note Message
1 .	60x60x2mm, 80°C MT, 600 bar
2 .	60x60x2mm
3 .	60x60x2mm, 80°C MT, 600 bar
4 .	60x60x2mm
5 .	2.0 mm/min
6 .	2.0 mm/min
7 .	2 mm/min
8 .	10°C/min

Resin Grade	Manufacturer	Category	Trademark
RTP 2800B-40D HF	RTP Company	TPV	RTP
Badalac® ABS 20 GF30	Bada AG	ABS	Badalac®
GELAST 1165	Guang Sung Plastics (GSPL)	TPV	GELAST
UNITIKA Nylon 6 RUN35-TA	UNITIKA Plastics Division	Nylon 6	UNITIKA Nylon 6
LUVOCOM® 1200-7116	LEHVOSS Group	ABS	LUVOCOM®